FREE SHIPPING On orders over $75
YES. FOR LIFE

Jackpot

Park And Ride.

Injecting energy and confidence into every park and pipe lap, the Jackpot isn’t just another true twin with a die-cut sintered base. MidBite masterfully blends a narrow, responsive waist width with wider, more stable platforms from the binding areas outward.

Jackpot Tech

Riders
Austen Sweetin, Todd Richards, Clint Allen
Lengths
149, 152, 154, 156, 156W, 159
Shape
True Twin
Outline
Mid-Bite
Base profile
Camrock 4-4-4
Core
Full Poplar
Glass
Triax
Base Material
Sintered True

Flex rating: 4/5

Mid-Bite

Outline

Mid-Bite

MidBite blends the response of a narrow waist width with the stability of wider nose and tail.

The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to- edge response. Meanwhile, from your binding out to the end of the sidecut we maintain a board width that is a stable platform for popping, spinning, and landing.

FULL POPLAR

Core

FULL POPLAR

Our baseline core for tip to tail wood-core snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.

Base Profile

CAMROCK 4-4-4
CAMROCK 4-4-4

Base Materials

SINTERED TRUE

Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

Jackpot Specs

Board Length (cm) Tip Length (cm) Tail Length (cm) Effective Edge (cm) Contact Length (cm) Waist Width (cm) Tip Width (cm) Tail Width (cm) Rocker / Camber (mm) Side Cut (mm) Ref. point (cm) (in) Ref. Stance Setback (cm) Min Stance Width (cm) (in) Max Stance Width (cm) (in)
149 20.75 20.75 112.5 107.5 24.8 29.15 29.15 R4/C4/R4 8.2/7.7/7.2/7.7/8.2 57.15 - 22.5 0 53.2 - 20.9 61.2 - 24.1
152 21 21 115 110 25 29.43 29.43 R4/C4/R4 8.4/7.9/7.4/7.9/8.4 58.42 23 0 54.4 - 21.4 62.4 - 24.6
154 21.25 21.25 116.5 111.5 25.1 29.58 29.58 R4/C4/R4 8.5/8/7.5/8/8.5 58.42 - 23 0 54.4 - 21.4 62.4 - 24.6
156 21.25 21.25 118.5 113.5 25.2 29.77 29.77 R4/C4/R4 8.6/8.1/7.6/8.1/8.6 58.42 - 23 0 54.4 - 21.4 62.4 - 24.6
156 Wide 21.5 21.5 118 113 25.8 30.34 30.34 R4/C4/R4 8.6/8.1/7.6/8.1/8.6 58.42 - 23 0 54.4 - 21.4 62.4 - 24.6
158 21.5 21.5 120 115 25.4 30 30 R4/C4/R4 8.7/8.2/7.7/8.2/8.7 59.69 - 23.5 0 55.7 - 21.9 63.7 - 25.1