Free Shipping on orders over $75

Typo

A BASIC ON STEROIDS, THE TYPO HANDLES BIGGER TERRAIN AT BIGGER SPEEDS.

Taking the TWS Good Wood-winning shape of the UnderBite Twin, we set the stance back 5mm for a more all-mountain setup that’s ready for resort powder stashes. We also upgraded the base and gave it a little more robust flex pattern to suit a more aggressive rider on a larger playing field.

UnderBite 101 - By stepping the outline in under the bindings (rather than out), UnderBite disrupts the surface area that has contact with the snow while the board is on edge. Without any extra rider effort, this disruption effectively increases edge pressure on the areas where you need it most, helping to initiate and hold your turn. The effect is stable edge control and a very confident, enhanced arc in your turn with no drag.

Typo Tech

Riders
The dedicated resort rat.
Lengths
149, 152, 155, 156W, 158, 159W, 161, 163W
Shape
Directional Twin
Outline
UnderBite
Base profile
Camrock 4-4-4
Core
Full Poplar
Glass
Biax
Base Material
Sintered Spec

Flex Rating: 4/5

UnderBite

Outline

UnderBite

UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Full Poplar

Core

Full Poplar

Our baseline core for tip to tail wood-core snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.

Base Profile

Camrock 4-4-4
Camrock 4-4-4

Base Materials

SINTERED SPEC.

This is the term we use and is the grey zone many companies play in. We call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre- consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.

Typo Specs

Board Length (cm) Tip Length (cm) Tail Length (cm) Effective Edge (cm) Contact Length (cm) Waist Width (cm) Tip Width (cm) Tail Width (cm) Rocker / Camber (cm) Side Cut (cm) Ref. point (cm) (in) Ref. Stance Setback (cm) Min Stance Width (cm) (in) Max Stance Width (cm) (in)
149 20.5 20.5 113 108 24.8 29.13 29.13 R3 /C3/R3 7.7 / 7 / 7.7 55.88 - 22.0 0.5 51.9 - 20.4 59.9 - 23.6
152 21 21 115 110 25 29.37 29.37 R4 /C4/R4 7.9 / 7.2 / 7.9 57.15 - 22.5 0.5 53.2 - 20.9 61.2 - 24.1
155 21.25 21.25 117.5 112.5 25.1 29.54 29.54 R4 /C4/R4 8.1 / 7.4 / 8.1 58.42 - 23.0 0.5 54.4 - 21.4 62.4 - 24.6
156 Wide 21.25 21.25 118.5 113.5 25.9 30.29 30.29 R4 / C4 / R4 8.2 / 7.5 / 8.2 58.42 - 23.0 0.5 54.4 - 21.4 62.4 - 24.6
158 21.5 21.5 120 115 25.3 29.81 29.81 R4 / C4 / R4 8.3 / 7.6 / 8.3 59.69 - 23.5 0.5 55.7 - 21.9 63.7 - 25.1
159 Wide 22 22 120 115 26.1 30.61 30.61 R4 / C4 / R4 8.3 / 7.6 / 8.3 59.69 - 23.5 0.5 55.7 - 21.9 63.7 - 25.1
161 22.5 22.5 122 116 25.4 29.91 29.91 R4 / C4 / R4 8.5 / 7.8 / 8.5 60.96 - 24.0 0.5 57.0 - 22.4 65.0 - 25.6
163 Wide 23 23 123 117 26.3 30.77 30.77 R4 / C4 / R4 8.6 / 7.9 / 8.6 60.96 - 24.0 0.5 57.0 - 22.4 65.0 - 25.6