- out of stock
THE Y. 20/21
THE Y. 20/21
Free 4-5 days shipping in United States for all orders over $ 75!
THE Y. 20/21 tech
Flex rating: 8/10
UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
Our baseline core for tip to tail woodcore snowboard construction. Strikes a predictable balance between durability, consistent flex and light weight.
This is the term we use, and is the grey zone many companies play in. We call it Sintered Spec because both its hardness and chemical properties, and its on-snow performance, are very close to true sintered - but it is formed using the extrusion process. How? – The raw material is actually pre-consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
Know your Specs
THE Y. 20/21 specs
|Board Length (cm)||151||154||157||161|
|Surface Area (dm2)||40.5||42.2||43.7||45|
|Tip Length (cm)||31.2||31.6||32||32.2|
|Tail Length (cm)||15.2||15.6||16||16.2|
|Effective Edge Length (cm)||116.6||118.8||121||124.6|
|Contact Length (cm)||104.6||106.8||109||112.6|
|Waist Width (cm)||25.6||26.2||26.6||26.8|
|Front Foot Width (cm)||30.7||31.5||31.9||31.9|
|Rear Foot Width (cm)||30.1||30.8||31.3||31.3|
|Tip Width (cm)||R2 / C4 / R2||R2 / C4 / R2||R2 / C4 / R2||R2 / C4 / R2|
|Tail Width (cm)||6.2||6.3||6.5||7.2|
|Rocker / Camber (mm)||21||22||23||23.5|
|Ref. Point (cm)||49.3||51.9||54.4||55.7|
|Ref. Point (in)||19.4||20.4||21.4||21.9|
|Ref. Stance Setback (mm)||57.3||59.9||62.4||63.7|
|Min Ref. Stance Width (cm)||22.6||23.6||24.6||25.1|
|Min Ref. Stance Width (in)||110-150||130-170||140-200||150-210|
|Max Ref. Stance Width (cm)||50-68||59-77||63-90||68-95|