GHOST

YES. Ghost snowboard, topsheet & base view.

GHOST

True camber in a modern Icon.

The Ghost is a mid-wide, true camber board with Slambacks and a mouthful of outline tech gracing its spec sheet. Directional Volume Twin outline helps the true twin float better than expected, and the MidBite allows a wider platform underfoot while maintaining a responsive waist width and confident edge hold.

$ 499.95

SKU: Y.21.SNM.GHO.XX.149.1

Out of stock

GHOST tech

riders
Justin Mulford, Derek Livingston
lengths
149,151,153,156,159,162,167
Shape
Directional Volume Twin
Outline
MidBite
Core
Poplar/Paulownia/Bamboo
Inserts
Slambacks
Glass
Triax

Flex rating: 7/10

Riding Type

outline

Directional Volume Twin

As the lines between free-ride and freestyle continue to erase, we had to address the needs of guys committed to riding only twins but finding themselves in more pow. Nose and tail volume is hard to notice in hard-pack unless you’re nose/tail pressing, but in pow it affects floatation and you can feel it. This led to the simple idea of the Directional Volume Twin. Symmetrical flex, centered stance, identical wide-points of the board (therefore, NOT tapered), identical length shovel lengths but with a slightly lower volume tail. The MidBite steps the outline of the board inward 1.5mm just inside the insert pack. This step remains (rather than bumping back out like the Basic) down about 1/3 the length of the sidecut until just inside the next insert pack. This single long disruption of the sidecut between the bindings cheats the waist width narrower, providing quicker edge-to- edge response. Meanwhile, from your binding out to the end of the sidecut we maintain a board width that is a stable platform for popping, spinning, and landing.

Core

Poplar/Paulownia/Bamboo

Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Base Profile

Camber

Base Materials

SINTERED TRUE

Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

GHOST specs

Board Length (cm) 149 151 153 156 159 162 167
Surface Area (dm2) 38.3 39.3 40.6 42.2 43.8 45.2 46.6
Tip Length (cm) 25.2 25.3 25.6 25.8 26.1 26.3 26.5
Tail Length (cm) 25.2 25.3 25.6 25.8 26.1 26.3 26.5
Effective Edge Length (cm) 110.6 112.3 113.8 116.3 118.8 121.3 126
Contact Length (cm) 98.6 100.3 101.8 104.3 106.8 109.3 114
Waist Width (cm) 24.5 24.8 25.3 25.8 26.3 26.8 26.6
Tip Width (cm) 28.9 29.2 29.9 30.4 31 31.2 31.3
Tail Width (cm) 28.9 29.2 29.9 30.4 31 31.2 31.3
Rocker / Camber (mm) C4 C4 C4 C4 C4 C4 C4
Sidecut (m) 7.1 7.3 7.3 7.5 7.7 7.9 8.2
Ref. Point (cm) 49.5 50.8 52.1 54.6 57.1 58.4 59.7
Ref. Point (in) 19.5 20.0 20.5 21.5 22.5 23.0 23.5
Ref. Stance Setback (mm) 0 0 0 0 0 0 0
Min Ref. Stance Width (cm) 45.5 46.8 48.1 50.6 53.2 54.4 55.7
Min Ref. Stance Width (in) 17.9 18.4 18.9 19.9 20.9 21.4 21.9
Max Ref. Stance Width (cm) 53.5 54.8 56.1 58.6 61.2 62.4 63.7
Max Ref. Stance Width (in) 21.1 21.6 22.1 23.1 24.1 24.6 25.1
Rider Weight (lbs) 120-180 120-180 130-190 150-200 150-200 180-220+ 180-220+
Rider Weight (kg) 54-82 54-82 59-86 68-90 68-90 82-99+ 82-99+