Fueling your desire to burn.
The Pro20 is for those who appreciate the 420’s surprising versatility and will use it for more than just epic powder days. More aggressive flex pattern and snap via the Poplar + Paulwnia core and carbon stringers, coupled with a high-speed Sintered True base and 4mm of camber underfoot, means you can push it hard, in all conditions
Flex rating: 8/10
When basics are still good. A radial edge is the classic snowboard, where you have radius that draws a single curve. It’s the most basic way to turn, it will allow you to carve but you are limited in the variations of turns you can make, basically you have one radius that you influence with the pressure applied. It brings it all down to your ability.
Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
Ghost/ Hel YES. / Standard/ Greats UnInc./ Hybrid/ Optisplitstic
Just like it says. Pellets or course powder are pressed until they form a solid. There are several suppliers for our entire industry, and each have different codes for them depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed often and prepared for local conditions."
|Board Length (cm)||148||152|
|Surface Area (dm2)||43.0||44.3|
|Tip Length (cm)||36.5||38|
|Tail Length (cm)||24.0||24.5|
|Effective Edge Length (cm)||105.1||107.5|
|Contact Length (cm)||87.5||89.5|
|Waist Width (cm)||28.6||28.6|
|Tip Width (cm)||33.8||33.9|
|Tail Width (cm)||32.2||32.1|
|Rocker / Camber (mm)||Flat||C4|
|Ref. Point (cm)||53.3||57.2|
|Ref. Point (in)||21.0||22.5|
|Ref. Stance Setback (mm)||1.5||1.5|
|Min Ref. Stance Width (cm)||49.3||53.2|
|Min Ref. Stance Width (in)||19.4||20.9|
|Max Ref. Stance Width (cm)||57.3||61.2|
|Max Ref. Stance Width (in)||22.6||24.1|
|Rider Weight (lbs)||140-180||150-200|
|Rider Weight (kg)||63-82||68-91|