420 Un..Inc. JPS 2022
420 Un..Inc. JPS 2022
They killed the last Unicorn
JP Solberg was devastated to learn that the last white rhinoceros had been killed and that now that race was extinct. He wanted a strong message to be said about the extinction of species. He used the 420 as a canvas for his protest. The Board is based on the Pro20 structure that was so welcome last year. The more aggressive flex pattern and snap via the Poplar + Paulwnia core, coupled with a high-speed Sintered True base and 4mm of camber underfoot, means you can push it hard, in all conditions.
Free 2-5 days shipping in United States for all orders over $ 75!
420 Un..Inc. JPS 2022 tech
Flex rating: 8/10
Radial: When basics are good. A radial outline is how the classic snowboards were made. Where you have the radius that draws a single circle. It’s the most basic way to turn, it will allow you to carve and hold an edge throughout your arc.
Designed specifically for the 420 and 20/20. </p><p> The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structural and Paulownia in the areas that are, we’re able to shave precious weight off our beloved 420 and now the 20/20. This helps a board not only float, but “feel” floaty.
Blended Rocker + Camber
This is the term we use and is the grey zone many companies play in. We call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre-consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
Know your Specs
420 Un..Inc. JPS 2022 specs
|Board Length (cm)||141||145||148||152|
|Surface Area (dm2)||35.2||38.4||43||44.3|
|Tip Length (cm)||36.1||36.5||36.5||38|
|Tail Length (cm)||23.6||24||24||24.5|
|Effective Edge Length (cm)||98.8||102||105.1||107.5|
|Contact Length (cm)||81.3||84.5||87.5||89.5|
|Waist Width (cm)||25.6||26||28.6||28.6|
|Front Foot Width (cm)||-||-||-||-|
|Rear Foot Width (cm)||-||-||-||-|
|Tip Width (cm)||30.6||30.9||33.8||33.9|
|Tail Width (cm)||29||29.4||32.2||32.1|
|Rocker / Camber (mm)||Flat||Flat||C2||C2|
|Sidecut Radius (m)||5.7||5.9||5.9||6.1|
|Ref. Point (cm)||49.5||49.5||53.3||57.1|
|Ref. Point (in)||19.5||19.5||21||22.5|
|Ref. Stance Setback (cm)||1.5||1.5||1.5||1.5|
|Min Ref. Stance Width (cm)||45.5||45.5||49.3||53.2|
|Min Ref. Stance Width (in)||17.9||17.9||19.4||20.9|
|Max Ref. Stance Width (cm)||53.5||53.5||57.3||61.2|
|Max Ref. Stance Width (in)||21.1||21.1||22.6||24.1|
|Rider Weight (lbs)||90-110||120-160||140-180||160-200|
|Rider Weight (kg)||41-50||54-72||63-82||72-90|