Out of stock
Still the best carving twin you’ll ever lay an edge on.
This newest design of Greats UnInc has an ever-growing legion of followers. This year we added a 149 to allow a larger amount of riders to feel the difference. An asymmetrical twin with asym-flex, asymmetrical MidBite was added to the opposing side-cut specs. The end result is a high performance twin that delivers better edge hold and greater stability on landings that will leave a permantent grin on your face.
Art by : Alex Fowkes
Is a British born award-winning graphic designer predominantly known for his large scale typographic installations. Currently living in the heart of the Coastal Mountain Range in Squamish, BC, Canada. An avid skateboarder and snowboarder since his early teens, Alex believes that skating and snowboarding heavily influenced his work ethic by teaching him to approach all work with a step and repeat attitude and a hunger to forever be improving and progressing.
Greats UnInc. tech
Flex rating: 7/10
Back in the day, asymmetrical boards meant you had to choose between a regular or goofy-stance board. Not only was that a nightmare for retailers, it didn’t suit anyone with a duck stance – which is everyone now. The Asym Twin applies a tighter, deeper heelside radial sidecut compared to the toe. In effect, balancing out the difference in a body’s natural tendency that we get with directional allowing you to ride switch better than you ever have.
Regular or goofy - it’s still a true twin. Just flip it around.
Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
Know your Specs
Greats UnInc. specs
|Board Length (cm)||149||151||154||156||159|
|Surface Area (dm2)||38,6||39.9||41.7||42.6||43.9|
|Tip Length (cm)||19,9||20||20.1||20.3||20.4|
|Tail Length (cm)||19,9||20||20.1||20.3||20.4|
|Effective Edge Length (cm)||114,6||116.4||119.1||120.8||123.5|
|Contact Length (cm)||109,3||111||113.7||115.4||118.1|
|Waist Width (cm)||24,5||25.3||25.6||25.9||26.2|
|Tip Width (cm)||29,7||30.5||30.9||31.1||31.5|
|Tail Width (cm)||29,7||30.5||30.9||31.1||31.5|
|Rocker / Camber (mm)||R0.2 / C0.4 / R0.2||R2 / C4 / R2||R2 / C4 / R2||R2 / C4 / R2||R2 / C4 / R2|
|Sidecut (m)||5.7 Heel / 6.2 Toe||5.9 Heel / 6.4 Toe||6.1 Heel / 6.6 Toe||6.3 Heel / 6.8 Toe||6.5 Heel / 7 Toe|
|Ref. Point (cm)||52,1||53.3||55.9||55.9||58.4|
|Ref. Point (in)||20,5||21||22||22||23|
|Ref. Stance Setback (mm)||0||0||0||0||0|
|Min Ref. Stance Width (cm)||46,1||47.3||49.9||49.9||52.4|
|Min Ref. Stance Width (in)||18,1||18.6||19.6||19.6||20.6|
|Max Ref. Stance Width (cm)||58,1||59.3||61.9||61.9||64.4|
|Max Ref. Stance Width (in)||22,9||23.4||24.4||24.4||25.4|
|Rider Weight (lbs)||120-160||140-190||150-200||160-220||170-250|
|Rider Weight (kg)||54-73||64-86||68-91||73-100||77-113|